产品展示
PRODUCT DISPLAY
最新促销您现在的位置: 首页 > 最新促销

Small airflow dryer

供应数量:796

发布日期:2022/3/11

有效日期:2022/9/11

原 产 地:

已获点击:796

打印当前页

免费咨询:021-54385660

发邮件给我们:sales@qfn17.com

分享到:
在线咨询 点击收藏

The minimum handling capacity is 100g.After the air is heated by an electric heater through the blower, the temperature reaches 180 ℃ (adjustable), the material is added to the feed hopper, and the screw feeder is evenly added into the drying pipe to contact with the hot air in parallel flow. Forming a convection-based complex heat exchange process that eventually meets the drying requirements of the product.

 

Small airflow dryer Product features:

1,The experiment process is intuitionistic, the adjustment is convenient, the equipment is easy to disassemble and easy to clean.

2,Air intake and feed volume can be adjusted conveniently and the operation is simple and easy.

3,Adopt multistage dust removal, product without loss.

4,Drying time is short, usually only a few seconds, the processing capacity is particularly suitable for expensive product research.

 

Small airflow dryer Work principle:

After the air is heated by an electric heater through the blower, the temperature reaches 180 ℃ (adjustable), the material is added to the feed hopper, and the spiral feeder is evenly added into the drying tube and contacted with the hot air, thus forming a complex heat exchange process dominated by convection. Finally meet the drying requirements of the product. The exhaust gas is emptied by cyclone separator and bag dust collector after drying pipe.

 

 Technical parameters:

Model No.: QFN-QL-1500

Structural form: Integral movable mode

Shape size: 800mm × 2000mm × 3500mm

Heating mode: electric heating

Electric heating power: 12kW

Blower power 370W

Fan volume: 200m3 / h

Air inlet temperature: 180 ℃ (adjustable, automatic)

Water evaporation: 2-5kg / h

Air pipe diameter 63mm

Total equipment weight: 150kg

Control mode: PLC

   

  上海乔枫实业有限公司专业生产喷雾干燥机的厂家,核心产品包括有机溶剂喷雾干燥机,低温喷雾干燥机,造粒喷雾干燥机,气流式喷雾干燥机,小型沸腾干燥机,小型沸腾造粒机等;还有常规产品包括压力喷雾干燥机,离心喷雾干燥机,实验型喷雾干燥机等。

          上海乔枫经过多年的发展,不断的引进日本和德国的技术,克服了国内很多物料很难喷雾干燥的难题,比如颗粒很难均匀,平均颗粒15微米以下很难实现,平均颗粒在100微米以上,颗粒实心圆等难题。