产品展示
PRODUCT DISPLAY
最新促销您现在的位置: 首页 > 最新促销

Experimental spray dryer-6000Y

供应数量:418

发布日期:2021/8/29

有效日期:2022/2/28

原 产 地:

已获点击:418

打印当前页

免费咨询:021-54385660

发邮件给我们:sales@qfn17.com

分享到:
在线咨询 点击收藏

Experimental spray dryer-6000YBrief description:

 1. Equipped with high borosilicate glass; 

2. The housing adopts spray molding ;

3. Equipped with original QFN-VER-0.5 drying system; 

4. Clear view of the atomization process;

Experimental spray dryer-6000YDetailed description:

 QFN-6000Y spray dryer is mainly suitable for colleges and universities, the Research Institute and the laboratory of food and medicine and chemical industry produce micro particle powder. It has broad spectrum and applicability for all solutions such as emulsion and suspension. It is suitable for the drying of thermal sensitive substances such as biological products, biological pesticides, enzymes and so on. Because the ejected material is only subjected to high temperature when sprayed into mist - sized particles , it is only momentarily heated, so It can keep these active materials dry and keep their active ingredients intact.

 

Main features:

1,Two-fluid nozzle, high efficiency.

2, Color LCD touch screen parameters display: inlet temperature ,outlet temperature ,peristaltic pump speed,air volume,needle frequency.

3,Automatic control: one button boot, set spray process parameters, temperature to the predetermined temperature, creeping pump to start itself, The running animation is displayed on the touch screen, and the running flow is clearly displayed. When the machine is shut down, it only needs to press the stop button, and the machine automatically shuts down safely.

4, Equipped with nozzle cleaner (Through needle), when nozzle is blocked, it will be cleared automatically and the frequency of needle can be adjusted automatically.

5, Shutdown protection function: when the machine is shut down, just press the stop button. The machine stops running immediay except the fan to ensure that the equipment will not be operated by mistake( Force off the fan ) and cause the heating part to burn out.

6,The spray, drying and collection systems are made of transparent, high-quality, high-boron-silicon heat-resistant glass materials, allowing the drying process to be carried out in a non-polluting environment.

7, Built-in imported compley oil-free air compressor, powder injection diameter is normal distribution, fluidity is very good, noise is very low, less than 60 db.

8, Two-fluid spray atomization structure, the machine is made of high-quality stainless steel material, compact design, no accessory equipment.

9, The design of dryness temperature control using real-time control PID constant temperature control technology can make the temperature accurate in the whole temperature zone , and the heating temperature control accuracy is ± 1 ℃ .

10, In order to keep the sample pure, the air inlet filter is equipped.

11,Feed quantity can be adjusted by feed peristaltic pump, the minimum sample quantity can reach 50 ml.

12, After drying, the granularity of dry powder is more than 95% in the same granularity range.

13,For viscous materials, equipped with nozzle cleaner (through needle, when nozzle is blocked, will be automatically removed, needle frequency can be automatically adjusted.

   

  上海乔枫实业有限公司专业生产喷雾干燥机的厂家,核心产品包括有机溶剂喷雾干燥机,低温喷雾干燥机,造粒喷雾干燥机,气流式喷雾干燥机,小型沸腾干燥机,小型沸腾造粒机等;还有常规产品包括压力喷雾干燥机,离心喷雾干燥机,实验型喷雾干燥机等。

          上海乔枫经过多年的发展,不断的引进日本和德国的技术,克服了国内很多物料很难喷雾干燥的难题,比如颗粒很难均匀,平均颗粒15微米以下很难实现,平均颗粒在100微米以上,颗粒实心圆等难题。如果您需要超越您所期望的喷雾干燥设备,那么请;如果您需要一个可以长期合作与信任的工作团队,那么也请。我们期待您的来电。